FDA Clears Microbial Reduction Robot for Healthcare Facilities

LightStrike+ devices are intended to perform microbial reduction on non-critical medical device surfaces free from visual soiling.

Robot Flashing In Or

FDA has granted Xenex Disinfection Services, Inc. De Novo authorization for the company’s LightStrike+ device, a high-intensity, broad-spectrum ultraviolet (UV) light robot. The authorization creates a new medical device product classification under which the LightStrike+ robot is the first and only product of its type, setting the precedent for FDA regulation of UV robots intended for use in reducing pathogens on non-porous, high-touch surfaces in the healthcare environment.

LightStrike+ devices are intended to perform microbial reduction on non-critical medical device surfaces free from visual soiling in the healthcare environment following manual cleaning and disinfection practices. They are authorized for use in healthcare facilities, including unoccupied operating rooms, hospital rooms, and other clinical settings where non-critical medical devices may be present.

More than 1,200 healthcare facilities worldwide have run LightStrike robots over 37 million cycles. With as low as a 2-minute run-time for microbial reduction, the new LightStrike+ device is built upon accumulated knowledge from more than a decade of best practices implemented at healthcare facilities, 45 peer-reviewed studies demonstrating safe and effective use, 193 patents, and industry leading technical and epidemiological expertise.

Dangerous pathogens remain on surfaces in healthcare facilities, even after thorough manual cleaning efforts. The LightStrike+ robot uses a xenon lamp to create high-intensity pulsed UV light that reduces the number of those pathogens on surfaces and helps to break the chain of transmission from one patient or healthcare worker to the next. Xenex’s FDA authorization is supported by rigorous testing performed on over 10,000 samples of vegetative bacteria and Clostridiodes difficile (C.diff) spores.

Manufactured in San Antonio, Texas, LightStrike+ robots are now available.

More in Equipment